RV Repair Work Order Template: What Goes on a Repair Order
Every field an RV repair order needs, from VIN and chassis vs coach to complaint, cause and correction and customer authorization, plus a copyable template.

On this page
The repair order is the one document that follows a rig through the whole visit. The service writer opens it at the counter, the tech works from it in the bay, the customer approves from it, and it becomes the invoice and the service history. When it’s thin, everyone fills the gaps from memory, and memory is what fails when a customer disputes a charge or a warranty claim comes back.
This guide covers what goes on a good RV repair order, field by field, how to write the complaint, cause and correction, what some states require before you start work, and a template you can copy into your own form.
What a repair order is forLink to the section “What a repair order is for”
A repair order does four jobs at once. It’s the shop’s instructions to the tech, the customer’s record of what they asked for and approved, the basis for the invoice, and the history you’ll read the next time the rig comes in. Every field below earns its place by serving one of those four.
RVs make it harder than cars. A motorhome is a truck chassis with a house on top, a towable has no engine at all, and both carry appliances from different manufacturers with their own warranties. Owners often drop the rig and leave, so approvals happen by phone or text days later. The repair order has to hold all of that without anyone relying on a sticky note.
Customer and rig informationLink to the section “Customer and rig information”
The customerLink to the section “The customer”
Name, phone, email and mailing address, plus the best way to reach them. Add anyone else allowed to approve work, such as a spouse or a fleet manager. Florida’s Motor Vehicle Repair Act, for example, lists the name and phone number of any other person authorized to approve repairs as something the written estimate can carry.
The rigLink to the section “The rig”
- VIN and, for a motorhome, the chassis VIN if it differs from the coach paperwork
- Year, make and model of the coach, and for a motorhome the chassis make and engine
- Type: Class A, B or C, fifth wheel, travel trailer, toy hauler, truck camper
- License plate and unit or stock number if it’s a dealer or fleet unit
- Odometer on a motorized rig, and generator hours when the generator is part of the work
- Arrival: drop-off, towed in, or the customer staying with the rig
- Condition at check-in: existing damage, with photos
Mileage isn’t just nice to have. California’s Bureau of Automotive Repair says a work order must contain the vehicle’s odometer reading, and Florida’s estimate rules list year, make, model, odometer reading and license tag number.
Chassis or coachLink to the section “Chassis or coach”
Mark every job as chassis or coach. Brakes, engine, transmission and steering are chassis work; roof, slide-outs, plumbing, the water heater and the fridge are coach work. The split tells you which manufacturer’s warranty might cover a job, which parts catalog to use, and sometimes which laws apply. Florida’s Act counts recreational vehicles as motor vehicles but excludes travel trailers without their own motive power, and it says a business that works solely on the coach portion of a recreational vehicle isn’t a motor vehicle repair shop under the Act.
Complaint, cause and correctionLink to the section “Complaint, cause and correction”
The heart of each job is the three Cs: the complaint (some shops say concern), the cause and the correction. Auto Service World’s guide to readable repair orders describes the same structure, adds a fourth C for confirmation that the problem is fixed, and makes the point that the write-up has to speak the customer’s language.
| Line | What to write | Example |
|---|---|---|
| Complaint | What the customer reported, in their words, with when and how often | “No hot water when on propane. Works on electric.” |
| Cause | What the tech tested and found | Burner lights and drops out after a few seconds. Thermocouple reading low. |
| Correction | What was done to fix it | Replaced thermocouple. Cleaned burner tube. |
| Confirmation | How you know it’s fixed | Ran on LP for 20 minutes, holds flame, water at temperature. |
Write the complaint at the counter, before anyone has an opinion. Write the cause and correction from the tech’s notes, without shorthand. California’s Bureau of Automotive Repair makes this point in its Write It Right guide: a customer isn’t likely to know that R&R means remove and replace.
Jobs, labor, parts, sublet and feesLink to the section “Jobs, labor, parts, sublet and fees”
Give each concern its own job, with its own subtotal. A customer can then approve the slide seal and leave the roof for spring, and you have a clean record of each decision. Our guide to writing RV repair estimates customers approve goes deeper on building and presenting jobs.
- Labor: hours and rate, or a flat price, and the tech who did the work.
- Parts: part number, description, quantity and price, marked new, used, rebuilt or reconditioned. California requires that marking: a part is treated as new unless the estimate says otherwise.
- Sublet: work you send out, like an alignment or a fiberglass repair, with what it costs you and what you charge. California’s rules require the estimate to state any sublet repair and, in most cases, the customer’s consent to it.
- Fees: shop supplies, disposal and similar charges, each as a named line. Florida requires an estimate that includes a shop supply or waste removal charge to say so.
- Diagnosis: its own job, approved before teardown.
Warranty and third-party payersLink to the section “Warranty and third-party payers”
RVs often have several warranties in play at once: the chassis maker, the coach builder, appliance makers and sometimes an extended service contract. For any job that will be claimed, record who the payer is, the claim or authorization number, and the name of whoever approved it. The complete complaint, cause and correction matter most here, since that’s what a claim reviewer reads.
If the payer’s approved amount isn’t known yet, say who is responsible for the difference. California’s regulations require an estimate to include the third-party payer’s approved amount if known, or a notice that the customer is responsible for contacting the payer for approval.
Authorizations and signaturesLink to the section “Authorizations and signatures”
Several states regulate when you need a written estimate and how a customer authorizes work. Two examples show how detailed it gets:
- California: no diagnosis or repair, including no-charge and warranty repairs, may begin without the customer’s specific authorization. Written authorization is the customer’s signature and date; oral authorization is recorded with the date, time, name of the person and the phone number called; electronic authorization is recorded the same way with the email address or number contacted. A note left with a vehicle dropped off after hours isn’t authorization.
- Florida: a written estimate is required before diagnostic or repair work when the job will exceed $150, unless the customer waives it on a signed disclosure statement.
Whether these laws reach RV work depends on the state and on the work. Florida’s Act, as above, covers motorized RVs but excludes travel trailers and coach-only shops. Check your own state’s attorney general, consumer protection office or repair licensing agency. Even where no law applies, recording every approval the same way is cheap protection.
A copyable RV repair order templateLink to the section “A copyable RV repair order template”
Copy these fields into your own form or shop software. Repeat the job block for every concern.
| Section | Fields |
|---|---|
| Header | Shop name, address, phone; RO number; date and time opened; service writer; promised date |
| Customer | Name; phone; email; address; preferred contact; other people allowed to approve work |
| Rig | VIN; year, make, model; type (Class A/B/C, fifth wheel, travel trailer, toy hauler); chassis make and engine; plate; unit number; odometer; generator hours |
| Check-in | Arrival (drop-off, towed in, staying); existing damage and photos; keys and items left with the rig |
| Job (repeat) | Chassis or coach; complaint; cause; correction; confirmation; tech |
| Labor | Hours and rate, or flat price |
| Parts | Part number; description; quantity; price; new, used or rebuilt; return old parts (yes/no) |
| Sublet | Vendor; description; cost; price |
| Fees | Shop supplies; disposal; storage after completion |
| Warranty | Payer; claim or authorization number; approved amount; customer portion |
| Authorization | Jobs approved and declined; approved total; who approved; method (signature, phone, text, email); date and time; number or email contacted |
| Totals | Labor; parts; sublet; fees; tax; deposit; balance due |
Paper or softwareLink to the section “Paper or software”
A paper or spreadsheet repair order can hold every field above. Where it struggles is everything around it: the tech’s notes get retyped onto the invoice, a phone approval lives on a scrap of paper, photos sit on someone’s phone, and finding what was declined on a rig two years ago means digging through a file cabinet.
Shop software keeps the repair order as one record from estimate to invoice. That matters more for RVs than for cars, because the same rig can sit for weeks while parts arrive and approvals come in by phone. Whichever you use, the test is the same: could someone who wasn’t there read the order and know what was asked for, what was found, what was approved and what was done?
How RVDesk handles the repair orderLink to the section “How RVDesk handles the repair order”
In RVDesk, the work order carries the customer, rig, complaint, jobs, parts, labor, fees, photos and payments on one record. The estimate goes out by text or email, and the customer approves or declines each job from their phone. Inspection findings go onto the estimate as jobs, and the finished work order becomes the invoice. Each rig on a customer’s record keeps its VIN, plate and unit number.
Common questionsLink to the section “Common questions”
What goes on a repair order?
The customer, the vehicle in detail (VIN, year, make, model, odometer), each concern as a job with its complaint, cause and correction, labor, parts, sublet work, fees, warranty details, and a record of who authorized the work, how and when.
What are the three Cs on a repair order?
Complaint (or concern), cause and correction: what the customer reported, what the tech found, and what was done to fix it. Some shops add a fourth C, confirmation that the problem is fixed.
Do I need a customer signature before starting RV repairs?
It depends on your state and the work. California requires specific authorization before any diagnosis or repair and accepts written, oral or electronic authorization if it’s recorded properly. Florida requires a written estimate over $150 unless waived. Check your own state’s rules.
Should chassis and coach work be on separate jobs?
Yes. Marking each job as chassis or coach helps with warranty claims and parts, and in some states, such as Florida, it affects whether repair laws apply.
Want to see an RV repair order go from check-in to invoice? Book a demo and we’ll walk through RVDesk with your shop’s work in mind.
Sources
- Auto Service World: Are your repair orders easy to read? Probably not (May 2022) (autoserviceworld.com)
- California Bureau of Automotive Repair: Write It Right (updated January 2026) (bar.ca.gov)
- California Code of Regulations, Title 16, § 3353 (estimate and work order requirements) (law.cornell.edu)
- California Code of Regulations, Title 16, § 3353.1 (authorization) (law.cornell.edu)
- Florida Statutes § 559.903 (Florida Motor Vehicle Repair Act definitions) (leg.state.fl.us)
- Florida Statutes § 559.905 (written repair estimates) (leg.state.fl.us)
We build RVDesk alongside a mobile RV repair business in Redding, California.
