RV Parts Ordering and Inventory for Repair Shops
How RV repair shops buy, order, receive and price parts: distributors, purchase orders, parts on order, cores, returns, warranty parts and what to stock.

On this page
- Where RV shops buy parts
- Setting up dealer and wholesale accounts
- Ordering per work order vs. keeping stock
- Purchase orders and receiving
- Keeping bays from sitting on parts that are on order
- Cores, returns and credits
- Warranty parts
- What to keep in stock
- Pricing parts and markup
- What parts software should do
- Common questions
- How RVDesk handles parts
- Sources
In most RV shops the bay doesn’t stop because nobody knows how to fix the rig. It stops because the part isn’t there. A slide motor is on backorder, the right water heater board went to the wrong job, or a part was ordered by phone and nobody wrote down when it was due. Parts are also where a lot of a job’s profit lives, so sloppy ordering and pricing costs you twice.
This guide covers how RV shops buy parts, how to order and receive them without losing track, what to do about cores, returns and warranty parts, what’s worth keeping on the shelf, and how to think about parts pricing. We don’t publish a recommended markup. Your costs and your mix of work decide that.
Where RV shops buy partsLink to the section “Where RV shops buy parts”
An RV is two machines in one: the house and, on a motorhome, the chassis. The parts come from different places.
RV parts distributors carry the coach side: appliances, plumbing, electrical, awnings, slide and leveling components, sealants and the long tail of small hardware. A few examples, described the way they describe themselves or the way trade press covers them:
- Keller’s website describes the company as a marine and RV wholesale distributor based in Port Trevorton, Pennsylvania.
- RV PRO has described NTP-STAG, based in Tualatin, Oregon and owned by Keystone Automotive Operations, as a wholesale supplier of RV parts and accessories.
- RV PRO reported in August 2025 that Meyer Distributing, which serves RV, towing and mobile home customers in the United States, had acquired Arrow Distributing, a family-owned RV and mobile home parts distributor in Omaha that has operated since 1981.
Auto and truck parts stores cover the chassis side on motorhomes and tow vehicles: brakes, filters, belts, batteries, steering and suspension parts. NAPA, for example, says it serves wholesale customers ranging from local parts stores to independent repair shops. Many stores run delivery routes to shops, and the nearest one is often the fastest source for a common chassis part.
Manufacturers are the third source, mostly for warranty parts and model-specific pieces that no distributor stocks. Expect slower turnaround and more paperwork.
Setting up dealer and wholesale accountsLink to the section “Setting up dealer and wholesale accounts”
Wholesale distributors generally sell to businesses, not to the public, and each sets its own terms for opening an account. Call each one, or ask a sales rep, what they need from you: usually business details, a resale certificate for your state and credit references if you want terms instead of paying up front.
Once an account is open, keep a record of the things you’ll need again:
- Your account number and the name and phone number of your rep
- Order cutoff times and delivery days for your area
- Payment terms and when statements arrive
- The return policy, including any restocking fee and the window for returns
- How core charges and core credits are handled
- How you get their price file, and how often it changes
Ordering per work order vs. keeping stockLink to the section “Ordering per work order vs. keeping stock”
Every shop does both. The question is which parts belong in which pile.
Special-order parts are bought for one rig: a specific refrigerator control board, a slide topper fabric, an awning arm for one model. These should be ordered against the work order, so the part, its cost and its arrival are tied to the job and the customer. Order them as soon as the estimate is approved, not when the tech gets to the job.
Stock parts are the ones you use every week across many jobs. They are bought to replenish the shelf, usually when they fall to a reorder point you’ve set.
A part that gets special-ordered three or four times a quarter is a candidate for stock. A stock part that hasn’t moved in a year is cash sitting on a shelf.
Purchase orders and receivingLink to the section “Purchase orders and receiving”
A purchase order is your shop’s written record of what it asked a vendor for. Phone and counter orders without one are how parts get double-ordered, never ordered, or billed at the wrong price. A useful PO records:
- The vendor, the date ordered and the date it’s expected
- Each part number, quantity and the cost you were quoted
- The work order and customer it’s for, if it’s a special order
- The vendor’s invoice number once it ships
Receiving is the other half. When the box arrives, check each line against the PO before it goes on the shelf or to the bay: right part, right quantity, right cost, nothing damaged. If two of three lines came, receive the two and leave the PO open for the third. Receiving is also the moment the real cost gets recorded, which matters when you price the job.
Keeping bays from sitting on parts that are on orderLink to the section “Keeping bays from sitting on parts that are on order”
A rig waiting on a part ties up a bay, a promise date and the customer’s patience. You can’t control a manufacturer’s backorder. You can control whether your shop knows what’s on order and plans around it.
- Mark a job as waiting on parts as soon as it is, and move the rig out of the bay if it can be moved.
- Review open purchase orders daily, oldest first, and chase anything past its expected date.
- When a part runs late, change the promised date and tell the customer before they call you.
- When the part is received, the job should go back on the schedule, not wait for someone to remember it.
Cores, returns and creditsLink to the section “Cores, returns and credits”
A core is the old part. NAPA calls the core charge a form of deposit you pay until you return the old part, and refunds it if the core is in acceptable condition and comes back within its window, which NAPA sets at 30 days for most parts. Other suppliers set their own rules, so check each one.
Cores are mostly a chassis-side issue: starters, alternators, brake calipers, batteries. The California Bureau of Automotive Repair says the core charge must be disclosed to the customer and separately itemized on the estimate. Check your own state’s rules, but itemizing it is a good habit anywhere.
Returns work the same way: a wrong part, a part the customer declined, a part that wasn’t needed. Each one is money you’ve paid that only comes back if someone ships the part, gets the return authorization number and checks that the credit lands on the statement. Keep a list of returns sent and credits still due, and review it when statements arrive.
Warranty partsLink to the section “Warranty parts”
Component warranty work brings its own paperwork, and each manufacturer sets the rules. Lippert’s warranty page, for example, says the work must be completed, photos taken as required by its flat rate, and the dealer work order ready before a claim is submitted, and it provides a separate form for returning warranty parts.
For parts used on warranty jobs:
- Record the part number, serial number where there is one, and the failure on the work order
- Tag the failed part with the work order and claim number, and keep it until the manufacturer says what to do with it
- Keep warranty replacement parts separate from stock so they aren’t sold on another job
- Track each claim until it’s paid, and know each manufacturer’s deadline for filing
What to keep in stockLink to the section “What to keep in stock”
There is no universal list. Your stock should come from your own work orders: pull the parts you used most over the last year and the ones you special-ordered more than once. In most RV shops that list leans toward consumables and fast-moving components: sealants and tapes, fasteners, fuses and connectors, plumbing fittings, common filters, and the appliance and control parts your techs replace every week.
One way to check whether you’re overstocked is inventory turnover. The Corporate Finance Institute defines it as the number of times a business sells and replaces its stock in a period, calculated as cost of goods sold divided by average inventory. A low turnover, it notes, can indicate excess or obsolete stock. Measure it for your parts department once a year, and look at slow-moving parts by name rather than only at the total.
Count the shelf regularly too. A cycle count of one section at a time catches shrinkage and mis-picks without shutting the parts room for a day.
Pricing parts and markupLink to the section “Pricing parts and markup”
Price from what the part really cost you, including freight if you paid it, not from an old catalog price. Then use one method across the shop, so the same part doesn’t sell for three different prices depending on who wrote the estimate.
A common method is a parts pricing matrix: a table of cost ranges, each with its own markup, where the markup gets smaller as the cost goes up. A WardsAuto article on dealership parts pricing describes a retail matrix built to make a larger gross profit percentage from low-cost parts, with high-priced parts sold closer to list. The logic is that a few dollars on a fuse is invisible to the customer, while the same percentage on an expensive appliance makes the estimate uncompetitive.
Two cautions. Markup and margin aren’t the same thing: a part marked up 50% over cost carries a margin of about 33%, not 50%. Our guide to setting RV repair labor rates walks through the same arithmetic for labor. And warranty parts are usually paid at whatever the manufacturer allows, not at your matrix, so price them from the claim terms.
What parts software should doLink to the section “What parts software should do”
Whatever you use, a spreadsheet or a shop system, it should be able to answer these without a phone call:
- What’s on the shelf, where it is, and what it cost
- What’s on order, from whom, for which job, and when it’s due
- Which jobs are waiting on parts right now
- What’s at or below its reorder point
- Which returns and core credits are still owed to you
- What a part costs from each vendor you buy it from
- The real parts margin on each job, from cost, not from a guess
Common questionsLink to the section “Common questions”
Where do RV repair shops buy parts?
Mostly from wholesale RV parts distributors for coach and component parts, from auto and truck parts stores for chassis parts, and from manufacturers for warranty and model-specific parts.
What is a core charge?
A deposit on a part that can be rebuilt, refunded when the old part is returned in acceptable condition within the supplier’s window. NAPA, for example, sets that window at 30 days for most parts.
What is a parts pricing matrix?
A table of part-cost ranges, each with its own markup, where the markup gets smaller as the cost rises. It keeps parts pricing consistent across advisors. The percentages should come from your own costs and margin targets.
Should I order parts per job or keep them in stock?
Both. Order one-off parts against the work order as soon as the estimate is approved, and keep in stock the parts you use across many jobs every week or special-order repeatedly.
How RVDesk handles partsLink to the section “How RVDesk handles parts”
In RVDesk, parts and inventory keep cost and price separately for each part, with its bin, vendor and reorder point, and parts used on a work order come off the count. Purchase orders link to the work order, are received line by line with partial deliveries left open, and return orders track whether the credit came back. Vendors keep their account number and rep, and you can import distributor price files and search them when building an order. Book a demo and we’ll walk through it with your parts room in mind.
Sources
- Keller: Marine & RV Wholesale Distributor (company website) (kellermarine.com)
- RV PRO: NTP-STAG Dives Into Marine Distribution (April 17, 2020) (rv-pro.com)
- RV PRO: Meyer Distributing Acquires Arrow Distributing (August 11, 2025) (rv-pro.com)
- NAPA: Professional services for wholesale customers (napaonline.com)
- NAPA: What is a core? (napaonline.com)
- California Bureau of Automotive Repair: Core Charges Explained (Fall 2021 newsletter) (bar.ca.gov)
- Lippert: Customer Service and Warranty Forms (support.lci1.com)
- Corporate Finance Institute: Inventory Turnover (corporatefinanceinstitute.com)
- WardsAuto: Make More Money Off Parts (September 1, 2010) (wardsauto.com)
We build RVDesk alongside a mobile RV repair business in Redding, California.
