Skip to content

How to Run an RV Service Department

A practical guide for RV service managers: roles, the repair order flow, warranty vs customer-pay work, parts waits, key measures and the software you need.

Shop management11 min read
A service advisor holding a tablet walks a customer past a fifth wheel in a covered RV service lot
On this page
  1. The roles in an RV service department
  2. The repair order flow, from write-up to delivery
  3. Keeping the board moving
  4. Communicating with customers
  5. Warranty work and customer-pay work
  6. Managing parts waits
  7. Measuring the department
  8. What software an RV service department needs
  9. Where RVDesk fits
  10. Common questions
  11. Sources

An RV service department sells time. Every rig on the lot is either moving toward delivery or waiting on something: an approval, a part, a warranty authorization, a technician. The department that runs well is the one where everybody can see which, and somebody owns the next step.

This guide is for service managers at RV dealerships and for independent shops with a service counter. It covers who does what, how a repair order should move from write-up to delivery, how to keep customers informed, how warranty work differs from customer-pay work, what to do about parts waits, the numbers worth measuring and what software the department actually needs.

The roles in an RV service departmentLink to the section “The roles in an RV service department”

Titles vary by size. In a small shop one person may write up, order parts and file warranty. In a dealership these are usually separate jobs. The RV Dealers Association’s Mike Molino RV Learning Center offers certification for five of them: service manager, service writer/advisor, warranty administrator, parts manager and parts specialist. That list is a useful way to think about the work even if one person covers several seats.

Who owns what in a typical RV service department
RoleOwns
Service managerThe board as a whole: workload, priorities, staffing, quality and the department’s numbers
Service advisor (service writer)The customer and the repair order: write-up, estimate, approvals, updates and delivery
TechniciansDiagnosis, the repair, findings and notes on the work order, and clocking their time to the job
PartsQuoting, ordering, receiving and tracking every part a repair order is waiting on
Warranty administratorManufacturer and component authorizations, claim documentation and claim submission

Technicians’ skill levels vary, and it helps to assign work with that in mind. The RV Technical Institute (RVTI) describes four levels: Level 1 is a pre-delivery inspection technician, Level 2 has theoretical knowledge of all RV systems and can do basic diagnostics and repairs, Level 3 adds vendor training in a specialty such as electrical, chassis, electronics, appliance or slideout, and Level 4 is a master technician trained across all five specialties.

The repair order flow, from write-up to deliveryLink to the section “The repair order flow, from write-up to delivery”

Every shop names its stages differently, but the order of events is the same. Write the stages down and make sure every repair order is in exactly one of them.

  1. Appointment. Book the drop-off, note how the rig is arriving and what it’s in for, and tell the customer honestly when to expect it back.
  2. Write-up. Record the customer’s concern in their words, the rig’s VIN or serial number, mileage or hours where they apply, and check-in photos of the existing condition.
  3. Pay type. Decide on each concern whether it’s customer-pay, warranty, an extended service contract or internal work. Mixing them on one line causes trouble later.
  4. Diagnosis. The tech finds the cause and documents it, with photos where they help the customer or the claim.
  5. Estimate and authorization. The advisor sends the estimate, job by job, and records what the customer approved or declined. For warranty, the administrator gets the manufacturer’s approval.
  6. Parts. Anything not on the shelf is ordered against the repair order, with an expected date.
  7. Repair. The tech clocks onto the job, does the work and notes anything else they find.
  8. Quality check. Someone other than the tech who did the work confirms it, including a road test on motorized units where it applies.
  9. Invoice and delivery. The invoice matches what was approved, the customer is told the rig is ready, and someone walks them through what was done.

Keeping the board movingLink to the section “Keeping the board moving”

RV repairs often hold a bay for days, and many rigs sit outside waiting on a part or a decision. The board stalls when nobody can see why a rig is stuck. A daily routine keeps it honest:

  • Start the day with every open repair order on one board, by stage, and every technician’s assigned work against their available hours.
  • For every rig that hasn’t moved since yesterday, name the reason and the person who owns the next step.
  • Chase approvals the same morning. An estimate that hasn’t been answered gets a call, not another day.
  • Don’t pull a rig into a bay until its parts are in and the work is authorized, unless the job is diagnosis.
  • Keep unassigned work visible so the next free tech picks up the right job, not the nearest one.
  • Close the day by updating the promised dates that changed, and telling those customers.

Communicating with customersLink to the section “Communicating with customers”

RV owners often aren’t local, or they’re living out of the rig while it’s in for service. They call when they don’t hear from you. The fix is to tell them at the points that matter: when the rig is checked in, when the estimate is ready, when a part is ordered and when it’s due, when the promised date moves, and when the rig is ready.

Text works well for these updates, because a customer can read a short message and open an estimate link anywhere. Text from a shop number, not an advisor’s personal phone, so the conversation stays with the repair order when someone is off or leaves. Business texting in the U.S. also comes with carrier registration and consent requirements, which our guide on text messaging registration for RV shops walks through.

Bad news travels better early. A customer told on Tuesday that a part slipped a week is far easier to deal with than one who finds out when they show up on Friday.

Warranty work and customer-pay workLink to the section “Warranty work and customer-pay work”

Warranty work is paid by the manufacturer on the manufacturer’s terms, and each manufacturer sets its own. Read the service and warranty policy manual for every brand you sell or service, and every component maker you are an authorized servicer for. As one example, KZ RV’s policy manual for service, parts and warranty (which also applies to Venture RV) says:

  • Approval or authorization is required before warranty repair work is started on its retail-sold units.
  • Sublet work needs prior authorization, whatever the amount.
  • Claims must be received no later than 60 days after the repairs are completed.
  • Labor is reimbursed under its flat rate manual, and diagnosis and test time isn’t covered unless the vendor flat rate allows it.
  • A warranty claim shouldn’t be left open while the customer is using the vehicle. If they pick it up before everything is done, submit what’s complete and start a new claim when they return.
  • Components such as refrigerators, furnaces and water heaters are warranted by their own manufacturers.

Other manufacturers will differ, so treat that as an illustration of what to look for, not a rule. State law can matter too. In California, for instance, the New Motor Vehicle Board explains that the Vehicle Code requires franchisors to approve or disapprove a dealer’s warranty claims within 30 days of receiving them, with written notice of the specific grounds for any disapproval, and to pay approved claims within 30 days.

Practical habits that keep warranty from swamping the department:

  • Flag the pay type at write-up, concern by concern, so a warranty item and a customer-pay item on the same rig don’t share a line.
  • Don’t start warranty work before the authorization is in hand, and record the authorization number on the repair order.
  • Photograph the failure and record serial numbers when you diagnose, not after the part is gone.
  • Track each claim’s submission deadline and status the way you track parts.
  • Tell the customer up front what warranty covers and what will be customer-pay, before the work starts.

Your posted rate on customer-pay work should rest on your own costs, not on what warranty reimburses. Our guide on setting RV repair labor rates shows the calculation.

Managing parts waitsLink to the section “Managing parts waits”

RV parts can take time. KZ RV’s manual, for example, says supplier parts normally take 7 to 10 working days to reach it, with longer lead times for items such as windows, furniture and fabric. A department can’t make the truck faster, but it can stop losing track of what’s on it.

  • Order parts against the repair order they’re for, with the vendor and an expected date.
  • Check in what actually arrived, line by line. A partial delivery stays open until the rest shows up.
  • Tell the advisor the moment a part for their repair order is received, so the rig goes back into the queue.
  • Move the promised date when a part slips, and tell the customer the same day.
  • Keep a deposit policy for special-order parts that may not be returnable.

Measuring the departmentLink to the section “Measuring the department”

There are a handful of standard measures, but different trainers and systems use the same names for slightly different ratios. Pick one written definition for each, use it every month and compare against your own history. We don’t publish targets here, because the right number depends on your pay plan, your work mix and how you define the inputs.

Common service department measures and how each is calculated
MeasureHow it’s calculated
Effective labor rate (ELR)Labor dollar sales ÷ labor hours billed for the period. Some trainers divide by hours paid to technicians instead.
Technician productivityHours produced (flagged or sold) as a percentage of clock hours actually worked
Technician efficiencyFlat-rate hours flagged ÷ clock hours on the job. Some sources use time available instead.

In RV PRO, dealer trainer Don Reed describes ELR as what the customer actually paid for the time charged on the repair order, and notes the customer may be retail, warranty or internal, each of which can carry a different rate. That’s why it pays to look at ELR by labor type as well as in total. A gap between your posted rate and your customer-pay ELR points at discounts, write-offs and under-quoted jobs. Reed also argues that gross profit on labor, not ELR alone, is the number to manage.

Productivity and efficiency answer different questions. Productivity asks how much of the day a tech produced billable work. Efficiency asks how fast they did the work they were given. A tech can be efficient and still unproductive if half the day goes to waiting on parts or approvals, which is a department problem, not a technician one. You need clocked time on each job to measure either.

What software an RV service department needsLink to the section “What software an RV service department needs”

Whatever you use, the test is simple: can anyone in the department answer “where is this rig and what is it waiting on?” without walking the lot or asking someone? The department needs:

  • Scheduling that books drop-offs and turns the appointment into a repair order
  • A work order that carries the customer, rig, concerns, jobs, parts, labor, photos and payments
  • A board showing every repair order by stage, and each technician’s assigned work
  • Estimates the customer can approve or decline job by job, with the approval recorded
  • Parts and purchase orders tied to the repair order, with receiving
  • A time clock that records technician time against each job
  • Customer texting from a shop number, kept with the customer and the repair order
  • Reports on labor sales, hours sold against hours worked and declined work
  • Roles and permissions, so advisors, techs, parts and the office each see what their job needs

Dealerships usually also run a dealer management system for sales and accounting, and file warranty claims through each manufacturer’s portal. Ask any service software vendor how it fits next to those, and what it doesn’t do.

Where RVDesk fitsLink to the section “Where RVDesk fits”

RVDesk is shop management software built for RV service. For a dealership service department, it puts every repair order on one job board through work orders, with a tech board that shows each technician’s work and hours. Estimates go to the customer’s phone, are approved job by job, and the advisor is notified when the customer views the estimate and when the work is authorized. Scheduling turns an appointment into a work order in one click, two-way texting runs from your shop’s own registered number, and reporting shows technician hours worked against hours sold. Purchase orders are tied to the work order, and each person signs in with a role: service advisor, technician, manager, accountant or owner.

RVDesk doesn’t file manufacturer warranty claims or connect to a dealer management system. It runs the service side next to them.

Common questionsLink to the section “Common questions”

What does an RV service advisor do?

The service advisor, or service writer, owns the customer and the repair order: writing up the concern, sending the estimate, recording approvals and declines, keeping the customer updated and handling delivery.

Are there certifications for RV service advisors and managers?

Yes. The RV Dealers Association’s Mike Molino RV Learning Center offers certification for service managers, service writers/advisors, warranty administrators, parts managers and parts specialists. Technician certification is offered separately by the RV Technical Institute in four levels.

How do you calculate effective labor rate?

Divide labor dollar sales by the labor hours billed for the same period. Some trainers divide by the hours paid to technicians instead. Look at it by labor type, because customer-pay, warranty and internal work can carry different rates.

Do RV manufacturers require authorization before warranty repairs?

Many do, but each manufacturer sets its own policy. KZ RV’s policy manual, for example, requires approval before warranty repair work starts on retail-sold units and requires claims within 60 days of the repair. Check the policy manual for every brand you service.

Want to see your service drive on one board? Book a demo and we’ll walk through RVDesk with your department in mind.

Sources

  1. RVDA Mike Molino RV Learning Center: Certification Program FAQ (rvda.org)
  2. RVIA RV Technical Institute: Technician Path and Curriculum (rvia.org)
  3. KZ RV / Venture RV: Policy Manual for Service, Parts & Warranty (March 1, 2024) (warranty.venture-rv.com)
  4. California New Motor Vehicle Board: Warranty Claims, RV Dealers (nmvb.ca.gov)
  5. RV PRO: What You Can Learn from Your ELR, Part One (Don Reed, March 2019) (rv-pro.com)
  6. Ratchet+Wrench: Utilizing Productivity and Efficiency Numbers (July 2018) (ratchetandwrench.com)
  7. Bradyware: Service Excellence, Proficiency (September 2025) (bradyware.com)

Written by the RVDesk team

We build RVDesk alongside a mobile RV repair business in Redding, California.

See RVDesk on your shop’s work.

Mon–Fri, 8 AM–5 PM Pacific